Projects

Richmond Train Station Home June 18, 2026 psgsol.official 6:29 pm Richmond Train Station Richmond Train Station Canopy Roof Lights Luxcrete was instructed to replace the original rooflights within the canopy which had been covered up for many years and they were discovered to be in poor structural condition.  The roof lights would be recreating the 1930’s Glasscrete effect.  https://www.southwesternrailway.com/richmond-station-restoration ROOF LIGHTS Type R.200/75 glazed with 165mm x 165mm pressed and annealed glass prism pattern lenses set in nominal 75mm deep adequately reinforced concrete ribs at 200mm cross centres. Previous Post

Truefitt & Hill Home June 18, 2026 psgsol.official 6:20 pm Truefitt & Hill Truefitt & Hill Mens grooming store. Luxcrete Limited were instructed to replace the old original cast iron Pavement Lights. These cast iron Pavement Lights were in a poor condition with numerous broken/damaged glass lenses and the frames worn smooth, they had become unsightly as well as losing their structural integrity. Luxcrete removed the existing cast iron Pavement Lights and cut back the bearings before setting up the formwork within the structural opening and then casting in situ our Pavement Lights construction type P.150/100. This construction contains 100 x 100mm glass lenses set into reinforced concrete ribs which are spaced at 150mm centers with an overall panel thickness of 100mm. Previous PostNext Post

Camden High Steet WC Home June 18, 2026 psgsol.official 6:09 pm Camden High Steet WC Camden High Street basement public toilets Luxcrete Pavement Lights construction type P.150/100 were installed due to the currenct pavement lights in a poor condition with numerous broker/damaged glass lens. Luxcrete removed the existing reinforced concrete Pavement Lights and cut back the bearings before setting up the formwork within the structural opening and then casting in situ our Pavement Lights construction type P.150/100. This construction contains 100 x 100mm glass lenses set into reinforced concrete ribs which are spaced at 150mm centres with an overall panel thickness of 100mm. Previous PostNext Post

MG Showroom Home June 1, 2026 psgsol.official 8:35 am MG Showroom MG Showroom Marylebone Road. Luxcrete Pavement Lights construction type P.150/100 were installed to form bridge panels over the open lightwell. Large panels were formed to allow potential customers to view the vehicles and smaller panels were formed to allow access to the showroom Previous PostNext Post

50 Sloane Street Home June 1, 2026 psgsol.official 8:35 am 50 Sloane Street 50 Sloane street project comprised basement lowering of an existing flat and covering the open light well to create a new retail unit. Luxcrete Pavement Lights construction type P.165/110 was specified to allow natural daylight to the basement area. This construction type uses our 100mm x 100mm pressed and annealed prismatic glass lenses set at 165mm centers with an overall construction depth of 110mm. Previous PostNext Post

Dalston Lane Home June 1, 2026 psgsol.official 8:35 am Dalston Lane Dalston Lane is a mixed use development located in the London Borough of Hackney. Luxcrete Limited were chosen to install a combination of our glazed and non glazed smoke outlet panels. Here we cast in situ our P.150/100 construction using 100mm x 100mm glass lenses set at 150mm centres and our S.150/100 non glazed panels with brass demarcation set into the top face to denote the structural opening. Previous PostNext Post

Tokenhouse Yard Home June 1, 2026 psgsol.official 8:35 am Tokenhouse Yard Luxcrete Limited were instructed to replace the old original cast iron Pavement Lights. These cast iron Pavement Lights were in a poor condition with numerous broken/damaged glass lenses and the frames worn smooth, they had become unsightly as well as losing their structural integrity. Luxcrete removed the existing cast iron Pavement Lights and cut back the bearings before setting up the formwork within the structural opening and then casting in situ our Pavement Lights construction type P.150/100. This construction contains 100 x 100mm glass lenses set into reinforced concrete ribs which are spaced at 150mm centres with an overall panel thickness of 100mm. Previous PostNext Post